Using MMS? Or want to try? Well, unfortunately, N900 doesn’t support MMS out-of-the-box, but fMMS can help us with that! In this guide, I will show you how to setup fMMS on your N900.
First, get fMMS from the Extras repository with these commands:
apt-get install fmms
Now, for the settings! Run fMMS and go to the settings:
Once there, tap another Settings button. Now go to this page and carefully fill in all the information for your mobile carrier. Make sure to double-check all the settings after you did so, a typo in the AP name can cost you quite a lot (literally, your carrier might charge you heavily if you try to connect to a wrong AP).
Now, a little note, if the data on the wiki page says “Use Proxy: No”, you will have to take another few steps:
1. Tap the system Menu button, go to Settings -> Internet connections -> Connections -> MMS -> Edit
2. Tap Next -> Next -> Advanced
3. Uncheck the “Use proxy” checkbox and click Save.
If it says “Use Proxy: Yes”, ignore the above and continue.
Now to test all your settings, set the “Polite” Setting in the fMMS settings menu and (via the statusbar menu) connect to an internet connection called “MMS”. Open up MicroB and go to the MMSC URL you put in fMMS settings (don’t worry, unless your carrier is crazy and charges for receiving MMS, you won’t lose money). If everything is setup correctly, you should have a blank page. If you have something like “HTTP Response: 400″ or any text like that, then you’ve got something wrong, check all your settings again.
There, now fMMS is set up and you can send and receive MMS messages! If you have still have any troubles (after you’ve passed the testing), please see the Troubleshooting here.
Guide requested by Steven Kierath, our reader. Have your own suggestions/requests/problems? Contact us on our Facebook page (you can find the link on the homepage) or send me an email.