I recently switched over to a Samsung Galaxy Note 2 so that I could work on a review of the Samsung Galaxy Gear smartwatch (review coming soon). In the past when I had tried to use phablets like the Note 2 and 3 as my primary device, I quickly gave up due to their size. This time I have gotten use to the size and will probably stick with the Note 2 for awhile. But there is one feature I missed from my Galaxy S3 and that is wireless charging. I had purchased a Samsung wireless charging back cover for Galaxy S3, but I couldn’t find a similar cover for the Note 2. That hasn’t stop me from adding wireless charging to the Note 2 and neither has Verizon.
Note: Images can be clicked to view a larger size.
Adding Qi wireless charging takes a Qi charger, a Samsung wireless charging cover or a Qi pad like the two you see above. You can find the chargers and the Qi pads online from places like Brando. Since I already have several chargers, I just needed the Qi pad designed for the Note 2, which I found for $10 from Brando.
The Qi pad is designed to set over the pins like the ones on the S3.
In the image above, you see my Samsung Galaxy Note 2 on the left and the Galaxy S3 on the right. Circled in red are the Qi wireless charging contacts on each phone. You’ll notice that there are no pins showing on the Note 2. That’s because on the Verizon version of the Note 2, they are located under the plastic frame. Why? Heck if I know, it’s some weird Verizon reason that is beyond understanding.
The pins are there though, so I set out to uncover them like Indiana Jones on an archeological expedition.
If you have an AT&T version of the Note 2, you can slap the Qi pad between the back cover and the battery and you’re done (I’m not sure about other carrier versions of the Note 2 though). But to find these pins on a Verizon version of the Note 2, it requires disassembling the phone. So proceed at your own risk. It really isn’t that hard, but if you decide to try this and screw up your phone, it’s not my fault.
There are 11 tiny screws that have to be removed. Don’t worry, they are tiny Philips head screws and not weird star screws like Apple uses.
The scariest part of the hack is removing the frame. Even after you unscrew the 11 screws, you still have to unclip the frame from around the screen. I used a spudger tool to wedge between the screen and the frame.
Once the frame has been removed, you can see the two contacts that had been covered. Now for some surgery.
First I marked the area that needed to be removed from the frame to expose the contacts.
Then I went to work with a small pair of diagonal cutters and a box cutter.
Shaving the plastic a little at a time until just enough of pins were exposed, without breaking the frame. This is the step that took the most time and care.
When I was finished, the small tab on the Qi pad with the contacts was able to slide over the contacts on the Note 2.
The battery then went in the slot and the back cover snapped back in place. Done! Ok, it wasn’t quite that easy. I had to take the frame back off at least once to enlarge the cutout until it was just right. I still had problems getting the Note 2 to charge until inspiration struck and I placed a small square of neoprene foam over the cutout area. The back cover pressed down on the foam which in turn pressed down on the contacts, causing them to make a better connection.
Now I can plunk the Samsung Galaxy Note 2 on the Qi charger on the desk in my basement, the one on my nightstand and the one at my day job. No more USB charging cables. Yay!